Filter By:
- Bar Ends (2)
- BMX (19)
- Bottom Brackets (7)
- Brakes/Levers/Pads (42)
- Cables (9)
- Cassettes/Freewheels (14)
- Chainrings (5)
- Chains (23)
- Show More Categories
- Cranksets (9)
- Derailleurs (10)
- Forks (1)
- Groups (4)
- Handlebar Grips/Tape (26)
- Handlebars (5)
- Headsets (3)
- Pedals (27)
- Saddles/Pads (25)
- Seatposts (12)
- Shift/Brake Combinations (3)
- Shifters (8)
- Shocks (1)
- Stems (7)
- Other (52)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts

$17.99
The absoluteBLACK integrated headset top cap is a one-piece top cap and bolt with a 5mm hex socket. It is designed to fit every standard starnut.
- One-piece design is lightweight (only 4g)
- Not suitable for "expanding" star nuts with a steel coil spring
- Compatible with the ENVE compression plug

$199.99 - $229.99
The X-Fusion Manic post uses internal cable routing and was designed around a low-profile seat cradle and seal collar to fit a broad range of frames. The mechanism is air-sprung and hydraulically locked. The remote can be run on the left or right, above or below the handlebar, but is optimized as a left shifter replacement for 1x drivetrains.
- Cable activated, hydraulic action, infinitely adjustable travel
- Double key-way design prevents lateral twisting
- Double bolt clamp with a wide range of seat angle adjustment. Fits both standard and 7 x 9 mm Carbon Rails
- Sealed cartridge internals for quick replacement
- Low profile head-seal and saddle clamp increase useable travel

$15.99
Shims for fitting 25.4mm diameter handlebars to 31.8mm clamp diameter stems. - Outside Diameter: 31.8mm - Inside Diameter: 25.4mm - Length: 48mm - Machined Aluminum - Anodized Black

$40.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x10 Socket Head Screws

$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screws

$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt

$48.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M4x10 Flat Head Screw

$22.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt (Long - Bolt Only)

$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt

$32.00
The Emergency Derailleur Hanger is a great thing to bring along on rides because it lets you temporarily replace a hanger that is damaged or broken on a ride. The Emergency Hanger works with most frames and derailleurs and allows the use of most gears, and more importantly, for the bike to be ridden instead of pushed or carried. So, it ensures that you can get home safe.Mounts to virtually any dropoutWill keep your bike shifting and get you homeCNC-machined aluminum for increased durabilityBlack anodized finish

$4.99
Replacement M8 Nut/Bolt Set for Wheels Mfg derailleur hangers. - M8 chainring bolt style fastener - Use with 5mm hex wrench

$3.41
Replacement M3 x 10 Socket Head Screw fastener for derailleur hangers.
- Thread: M3-0.5
- Thread length: 10mm
- Use with 2.5mm hex wrench
- Bag of 5

$140.00 - $164.99
WeThePeople's Battleship Fork is strong and technical with super thick investment cast dropouts that are designed to be the perfect partner for WTP's most popular frame.
- Super short 24mm offset street fork
- Invest cast dropouts and fork end, designed to work flawlessly with plastic pegs and hub guards
- Incredibly strong design
- 7075-T6 alloy top bolt, M24 thread
- Tapered, triple butted fork blades
- Integrated crown race, designed to work with integrated headsets with a 45-degree bearing

$23.99 - $29.99
WeThePeople's Compact Mid Bottom Bracket uses high-quality precision sealed bearings for use with Mid-size bottom bracket shells. It includes their own 6061 alloy tube spacer and comes with a selection of spacers to help you dial in your drivetrain.

$25.99
This is a set of universal, removable brake hardware for WeThePeople bikes. Did you lose yours after you took it off? Yeah, we did, too.

$25.99
WTB's Comfort Zone Clamp-Ons feature an ergonomic shape with a soft rubber. This design gives you more surface area to hold, absorbs shocks and vibrations, and prevents hot spots in your palms.

$32.99
The Tech Trail Clamp-Ons combine WTB’s Clamp-On technology with a slim, 30-millimeter profile ideal for smaller hands. The small knobs and DNA rubber gives you good grip while being easy on the hands. Dual clamps keep installation and removal simple and resist twisting and slipping too.

$22.99
- Large blocks of conforming rubber cover the entirety of the Wafel grip, while ample spacing allows them to smush independently for increased grip while also providing an exit channel for muck and water
- 130mm length and 30mm diameter is good for hands of all sizes
- Single lock on clamp holds the grip firmly in place

$41.99 - $49.99
Really popular solid selling half link chain. Extra wide and heat-treated mushroomed pins, stronger rollers and heat treated side plates provide maximum strength and durability.
- 1/8" size, includes 98 links and 2 master pins
- Colored chains are Teflon coated for low friction
- Compatible with 8T driver and up
- Links (links): 98
- Color: Pink
- Width: 1/2 x 1/8"
- Drivetrain Speeds: Single Speed
- Chain Connection Type: Pressed Pin
- Half Link Chain: Yes

$25.00
Superior hand feel that you need to feel to believe. Winner of world cups, Cape Epics, and stages of La Ruta de Conquistadores.
- Material: Dual-density high-performance rubber
- Supacaz pattern design for max control and ultimate tackiness
- Diameter: 32mm
- Star Ringz: 100% Aluminum
- Anodized/powder coated
- Laser-etched

$25.00
This ergonomically designed grip fuses comfort, performance, and style all into one. The ergonomically designed wing is plush for not only your hands but also your wrists and upper body. This is the ideal grip for Marathons or Stage Racing.
- Material: Dual-density high-performance rubber
- Star Ringz: 100% aluminum
- Anodized/powder coated
- Laser-etched

$56.00
Stay fully planted as you smash the mountain. The lightweight Smash pedal offers uncompromising performance with its strategically placed pins and bulletproof, extended axle design.
- Body: Reinforced Premium Thermopoly
- Axle: CNC-machined Cro-Mo
- Bearings: Ultralight, self-lubricating sealed bushings
- Replaceable pins
- Size: 113mm x 114mm
- Weight: 180g (each)

$40.00 - $43.99
$41.99 - $43.99
Up to 7% Off
• Aluminum
• Coil spring provides plush suspension
• Adjustable pre-load design
• Micro-adjust seat clamp
• 450 grams

$47.99
Sunlite's Adjustable Stem adjusts from 0 to +60 degrees so that you can place your handlebars wherever they are most comfortable. It boasts light and durable aluminum construction with steel bolts. It fits on 1- and 1 1/8-inch forks and accepts 25.4mm- and 31.8mm-diameter handlebars too, with included shims. Plus, its 2-bolt clamp makes changing bars easy and holds fast.
Page 1 of 11
Next page